- Maintenance
- Preventative Maintenance
- Replacing O-rings & Screens
- Spray Wand Maintenance
- Water Pump Maintenance
- Engine Maintenance
How do you prevent streaks when rinsing vertical surfaces?
PRODUCTS
TIP #7
Keep Your Distance
Maintain a constant distance between the nozzle and the cleaning surface to prevent "zebra striping".
Keep Your Distance
Maintain a constant distance between the nozzle and the cleaning surface to prevent "zebra striping".
TIP #13
When Cleaning Any Surface
Start at a distance and move closer until the desired effect is achieved.
When Cleaning Any Surface
Start at a distance and move closer until the desired effect is achieved.
TIP #15
Use a Floor Brush
When cleaning a deck, use a floor brush attachment to help penetrate heavily soiled areas and scour built-up grime.
Use a Floor Brush
When cleaning a deck, use a floor brush attachment to help penetrate heavily soiled areas and scour built-up grime.
Product Maintenance
Water Pump Maintenance
| Step 3: Changing pump oil. Fill the water pump with fresh oil, following the directions in the owner’s manual. Note: Premeasured bottles of water pump oil are available for some models. Reinstall the oil cap and tighten firmly, then wipe up any excess oil around the cap and set the pressure washer in the upright position. Clean up any spilled oil, and dispose of used oil and soiled rags in accordance with local environmental statutes. |  |
   |
Home | Projects | Products | Basics | Maintenance | Newsroom | Site Map | 
What is RSS?
web design by Starkmedia
What is RSS?web design by Starkmedia