- Maintenance
- Preventative Maintenance
- Replacing O-rings & Screens
- Spray Wand Maintenance
- Water Pump Maintenance
- Engine Maintenance
How do you prevent streaks when rinsing vertical surfaces?
PRODUCTS
TIP #10
Rinsing Vertical Surfaces
When rinsing vertical surfaces, start at the top and work downward. Gravity will help the clean water flush away dirt, debris, and detergent residue, in addition to preventing streaks.
Rinsing Vertical Surfaces
When rinsing vertical surfaces, start at the top and work downward. Gravity will help the clean water flush away dirt, debris, and detergent residue, in addition to preventing streaks.
TIP #12
The Turbo Nozzle Advantage
A turbo nozzle rotates a 0° jet stream in a circular pattern at 5,000 to 9,000 RPMs, increasing its effective cleaning power by up to 50%.
The Turbo Nozzle Advantage
A turbo nozzle rotates a 0° jet stream in a circular pattern at 5,000 to 9,000 RPMs, increasing its effective cleaning power by up to 50%.
TIP #18
Cleaning Outdoor Tile
Scrub the surface using a floor brush attachment and a mold and mildew remover detergent, then rinse thoroughly using a wide spray pattern. Once dry, seal grout lines with exterior grade sealer, following the manufacturer's instructions.
Cleaning Outdoor Tile
Scrub the surface using a floor brush attachment and a mold and mildew remover detergent, then rinse thoroughly using a wide spray pattern. Once dry, seal grout lines with exterior grade sealer, following the manufacturer's instructions.
Product Maintenance
Spray Wand Maintenance
| Step 2: Use a paper clip to free any foreign material clogging or restricting the orifice or spray tip (inset). Note: Some manufacturers provide a wire nozzle-cleaning tool with the maintenance kit. |  |
   |
Home | Projects | Products | Basics | Maintenance | Newsroom | Site Map | 
What is RSS?
web design by Starkmedia
What is RSS?web design by Starkmedia