› newsroom
  • Maintenance


How do you prevent streaks when rinsing vertical surfaces?
Rinse from left to right
Rinse from right to left
Rinse from top to bottom
Rinse from bottom to top

SUBMIT

PRODUCTS
TIP #9
Preventing Streaks
To prevent streaks on vertical surfaces, always begin pressure washing at the bottom of the surface and work upward.
TIP #10
Rinsing Vertical Surfaces
When rinsing vertical surfaces, start at the top and work downward. Gravity will help the clean water flush away dirt, debris, and detergent residue, in addition to preventing streaks.
TIP #14
Relieving Pressure
If the pressure washer is not equipped with an easy start feature, squeeze the spray gun trigger to relieve the pressure in the water pump.

Product Maintenance

Replacing O-rings & Screens

pressure washing o-ring replace

Step 3: Cleaning & Replacing In-Line Screen. Detach the high-pressure hose and wand from the spray gun. Remove the O-ring and in-line screen from the wand extension. Flush the screen, spray gun, and wand with clean water from a garden hose to clear debris. Step 1Step 2Step 3Step 4