- Maintenance
- Preventative Maintenance
- Replacing O-rings & Screens
- Spray Wand Maintenance
- Water Pump Maintenance
- Engine Maintenance
Which Quick Connect Spray Tip creates the most intense spray pattern?
PRODUCTS
TIP #3
Find a Stable Surface
Make sure the unit is on a stable surface and the cleaning area has adequate slopes and drainage to prevent puddles.
Find a Stable Surface
Make sure the unit is on a stable surface and the cleaning area has adequate slopes and drainage to prevent puddles.
TIP #14
Relieving Pressure
If the pressure washer is not equipped with an easy start feature, squeeze the spray gun trigger to relieve the pressure in the water pump.
Relieving Pressure
If the pressure washer is not equipped with an easy start feature, squeeze the spray gun trigger to relieve the pressure in the water pump.
TIP #22
Use a Water Broom
To speed up cleaning and provide professional results. The base has wheels on it to help you effortlessly move the pressure washer across the surface for consistent cleaning.
Use a Water Broom
To speed up cleaning and provide professional results. The base has wheels on it to help you effortlessly move the pressure washer across the surface for consistent cleaning.
Product Maintenance
Replacing O-rings & Screens
| Step 2: Cleaning & Replacing Water Inlet Screen. Use a small flathead screwdriver to remove the inlet screen from the hose connector. If the screen is clogged, flush it and the hose connector with clean water. If the screen is damaged, replace it with a new one with the dome-side of the screen pointed outward. |  |
    |
Home | Projects | Products | Basics | Maintenance | Newsroom | Site Map | 
What is RSS?
web design by Starkmedia
What is RSS?web design by Starkmedia