- Maintenance
- Preventative Maintenance
- Replacing O-rings & Screens
- Spray Wand Maintenance
- Water Pump Maintenance
- Engine Maintenance
True or False: The fastest and easiest way to control the pressure is to change the distance between the nozzle and the cleaning surface?
PRODUCTS
TIP #5
Always Test the Cleaning Power
Choose and inconspicuous area of the cleaning surface. Start with a wide-fan spray at least four to five feet from the surface. Move closer as needed.
Always Test the Cleaning Power
Choose and inconspicuous area of the cleaning surface. Start with a wide-fan spray at least four to five feet from the surface. Move closer as needed.
TIP #6
Ensure Consistent Results
Keep the nozzle in motion, spraying at a steady speed with long, even strokes to ensure consistent results.
Ensure Consistent Results
Keep the nozzle in motion, spraying at a steady speed with long, even strokes to ensure consistent results.
TIP #11
Cleaning Out of Reach Surfaces
To clean out of reach surfaces, such as the second story of a house, use a narrow spray pattern to propel the water stream up to the surface.
Cleaning Out of Reach Surfaces
To clean out of reach surfaces, such as the second story of a house, use a narrow spray pattern to propel the water stream up to the surface.
Product Maintenance
Replacing O-rings & Screens
| Step 1: To replace an O-ring, use a small flathead screw-driver to pry off the worn or damaged O-ring and discard. Install an O-ring in the same position as the old one. |  |
    |
Home | Projects | Products | Basics | Maintenance | Newsroom | Site Map | 
What is RSS?
web design by Starkmedia
What is RSS?web design by Starkmedia