› newsroom


How do you prevent streaks when rinsing vertical surfaces?
Rinse from left to right
Rinse from right to left
Rinse from top to bottom
Rinse from bottom to top

SUBMIT

PRODUCTS
TIP #10
Rinsing Vertical Surfaces
When rinsing vertical surfaces, start at the top and work downward. Gravity will help the clean water flush away dirt, debris, and detergent residue, in addition to preventing streaks.
TIP #17
Cleaning Garage Floors
Open all garage doors, clear the floor of obstacles, and cover walls, workbenches, and other fixed equipment with plastic drop cloth. Direct the deflected water spray toward the open garage doors and away from walls and equipment. The pressure washer itself must be operated outdoors.
TIP #20
Cleaning Garden Tools
To remove thick and impacted mud from shovels, pitchforks, wheelbarrows, or other non-sensitive metal surfaces, thoroughly spray the tools and let soak for a few minutes, then rinse with a high-pressure, tight-fan spray.
print

Techniques

Using Detergents

pressure washer cleaning with detergent

Step 4: Disengage the trigger safety. Depress the trigger until the detergent is present in the water stream, and then apply detergent to an identifiable section of the cleaning surface. On vertical surfaces, work from bottom to top to avoid streaks. Step 1Step 2Step 3Step 4
Step 5Step 6Step 7
View All